KE6322-200 Isolation current transformer

KE6322-200 is a two phase Isolation current transformer (ICT) used for the test of I-P close link meter

Features:

High accuracy through active electronic error compensation.
Direct perforated installation
Wide current dynamic range: 10mA --200A
Output power: Max 60VA per phase
When secondary measure open circuit or overload occurs, ICT will protect automatically and send out alarm signal
Can realize local bypass through button
With RS485 port, can realize remote control and status monitoring

Technical characteristics:

Nominal frequency fn: 50 Hz (45 … 55 Hz) or 60 Hz (54 … 66 Hz)
Ratio: 1:1 (primary current = secondary current)
Current range: 10 mA ... 200 A
Class: 0.02 (100 mA … 200 A)

Weight: approx. 12kg

Dimensions: W 200mm x D 164mm x H 270 mm

Error

Current range	100 mA … 200 A (whole output burden range)	25mA … 100mA (whole output burden range)	10mA … 25mA (whole output burden range)
Ratio error	≤ ± 0.01 % (typical)	≤ ± 0.10 % (typical)	≤ ± 0.30 % (typical)
Ratio error	≤ ± 0.02 % (max.)	≤ ± 0.20 % (max.)	≤ ± 0.50 % (max.)
Angle error	≤ ± 0.5min	≤ ± 1min	≤ ± 2min

200A High Accuracy Electrical Current Transformer Safety 2 Phase Accuracy 0.02

Meter Test Equipment

Portable Meter Test Equipment

Electric Meter Testing Equipment

Energy Meter Testing Equipment

Single Phase Meter Test Bench

Three Phase Meter Test Bench

Energy Meter Calibration Equipment

High Power Source

Reference Standard Meter

Portable Reference Standard Meter

Portable Meter Tester

Portable Power Source

Isolation Current Transformer

Voltage Isolation Transformer

200A High Accuracy Electrical Current Transformer Safety 2 Phase Accuracy 0.02

Technical characteristics:

accuracy test of current transformer

current transformer accuracy class

accuracy of current transformer